D&D Auto Detailing, LLC
Specializing in fine auto detailing and long term 
protective coatings for paint, leather, fabric, plastic, and glass

D&D Auto Detailing

Subtitle

Optimum Authorized Installer

Optimum Opti-Coat Pro/ Pro Plus+

Pricing By Estimate

What are the benefits of Opti- Coat Pro?
  • Permanent coating with 5 year warranty
  • Low maintenance- never wax your car again
  • Hydrophobic coating prevents dirt from sticking to your paint or wheels
  • Harder then clear coat for increased scratch resistance
  • Chemical resistant- cannot be removed with degreasers or harsh car wash soaps
  • Prevents damage from bird droppings, tree sap, and bug guts
  • Provides increased UV protection to prevent paint from fading
  • Locks in the gloss for a permanent shine
  • Approximately 100 times thicker than any wax or sealant
  • Can be applied to wheels to permanently repel brake dust!
Please visit the Opti- Coat Pro FAQ for more information


Opti-Coat Application Process

Properly prepping the vehicle for Opti-Coat is essential for proper bonding and maximum protection. The process outlined below is the recommended procedure by Optimum Polymer Technologies.

Wheels, Tires, & Wheel Wells

The wheel wells and tires are cleaned using a paint safe degreaser. The wheel faces, barrels, and behind the spokes are cleaned using a pH balanced wheel cleaner and a variety of soft brushes. The wheels are rotated to ensure the areas behind the brake calipers are cleaned as well.


*Opti-Coat PRO permanent wheel protection can be added for an additional charge*


Door Jambs
The door jambs, trunk jambs, and gas cap area are thoroughly cleaned using a paint safe degreaser and soft boar's hair brush.

Hand Wash
The car is thoroughly rinsed and pre- treated with a bug and tar remover. The two bucket method is used with a genuine sheep skin wash mitt and grit guard inserts. The vehicle is dried with compressed air and high quality microfiber drying towels.

*The proper products and techniques are utilize to ensure no swirl marks or scratches are induced in the paint during the wash process.

Paint Decontamination
A paint cleaner is used during the wash process to remove any industrial fallout, rail dust, or brake dust which may have accumulated overtime. Vehicle manufacturer studies have shown that failure to remove these iron contaminants from your paintwork can cause premature degradation of the paint system. While clay products are useful for removing above surface contaminants, they cannot deep clean the pores of the paint. This can only be accomplished through a chemical cleaning.

Clay Bar
The paintwork then goes through a clay bar decontamination process to remove any remaining contaminants such as fallout, sap, bug residue, overspray, road film, etc. The clay will remove any rough or bumpy feeling on the paint leaving a completely smooth and clean surface.


Primer Polish
The paint is lightly polished using Primer Polish to promote bonding, speed up Opti-Coat cure time, increase gloss, and clean the paint. Any scratch removal/ paint correction is an additional charge, if requested.


*The proper products and techniques are utilized to ensure no swirl marks, holograms, or buffer marks are induced into the paint.

Opti-Coat PRO Application
The vehicle is then pulled into an enclosed, dust free, temperature controlled booth with specialized lighting for Opti-Coat application. Opti-Coat PRO is applied to all painted surfaces, hard plastic, headlights & taillights, chrome & aluminum trim. We then turn on the heaters and bake Opti-Coat at over 140*F to accelerate the curing and hardening process.

*Upgrade to Opti-Coat PRO Plus+ for additional gloss, slickness, and water spot resistance.

Final Vehicle Inspection
After all work has been completed, a final inspection is done with the owner.

Optimum Opti- Coat Professional